Post Jobs


Take out remainingmaster jammed in the thermal head;4. The installation instruction above takes Windows XP as an example. Disposal box full Please close the box. Press down paper feeding tray switch,lift down the feeding paper tray;3. Two ways of setting to turning back to the standard position: Press master-making key, start again. Take out jammed paper on the paper feed roller;3.

Uploader: Mikagami
Date Added: 17 February 2004
File Size: 70.65 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 3862
Price: Free* [*Free Regsitration Required]

Middle Paper Jam Press the jog switch of paper feed tray and remove the jam paper. If the error remains, contact Service Dept.

Check the following information and the related itemsbefore calling your authorized service department. I tried changing the run hours directly through the ET and it wouldnt let me then I tried opening up the 3068 file itself and chnaging it in there and it wouldnt allow it. This driver procedure is normally operated under Windows and WindowsXP.


Right Paper Akinfo take out jam paper as below: Plug the USB cable into the digital duplicator and thecomputer;2. Sundries in Feed Part Press down the jog switch and take out the jam paper. Relocate the print paper,lift up paper lock lever. Operation manual-RD, Published by pingaleanku The following dialog box appears: Press drum micro switch until warning stops;2.

Max. B4 Original & B4 Master Digital Duplicator (RD-3608)

Best Regards, Al Hunt. If the user wants to set a new password please follow the stepsabove. Connect the USB cable;3.

Put the roll core into disposal master box;5. Open drum locked switch ,take out the drum; 81 4. Chapter 5 Consumables ReplacementThis chapter describes how to replenish supplies and dispose of them regularly. Press master-making key ,and make master again. Place the paper and lift up paper lock lever.

China Max. B4 Original & B4 Master Digital Duplicator (RD) – China Duplicators, Photocopier

Please do not touch paper cutting to avoid danger. Insert it again ,then press the lock switch;4. Press drum switch and take out paper jammed;3. Close the front cover. Then Turn on the printer.


Press down the drum lock switch;3. Click Yes to continue installing the driver.

Press the master disposal box switch,open the disposal master box up to max; 67 2. Click Finish to complete the driver installation. Message 2 of 3 2, Views. Default setting is 85ppm, which is indicated by the middle light. Master Ejection ErrorPlease clear error as below.

Operation manual-RD-3608,4129

Keep pressing drum microswith until warning stops, which indicates drum is back to stop position;4. Close original paper receive tray;4. Press scan lock lever, and push scan table;2.